Delete RFID-Transponder-Source-Code/RFID-Transponder-Source-test.ino

RFID-Transponder-Source-Code/RFID-Transponder-Source-test.ino

@@ -1,81 +0,0 @@
-#include "ST25DVSensor.h"
-#include <SPI.h>
-#include <SD.h>
-#include <Wire.h> // Include Wire library for I2C communication
-
-#if defined(ARDUINO_B_L4S5I_IOT01A)
-  #define GPO_PIN PE4
-  #define LPD_PIN PE2
-  #define SDA_PIN PB11
-  #define SCL_PIN PB10
-  TwoWire MyWire(SDA_PIN, SCL_PIN); // Define TwoWire instance for I2C
-  ST25DV st25dv(12, -1, &MyWire); // Initialize ST25DV sensor with MyWire
-#else
-  #define DEV_I2C Wire
-  ST25DV st25dv(12, -1, &DEV_I2C); // Initialize ST25DV sensor with default Wire
-#endif
-
-String last_read;
-bool cleared = false;
-const int chipSelect = 7;
-
-void beep(int pitch, int duration, int loudness){
-  tone(24, pitch, loudness);
-  delay(duration);
-  noTone(24);
-  delay(10);
-}
-
-void printStart(){
-  Serial.println(F("         ╔═══╦═══╦══╦═══╗"));
-  Serial.println(F("         ║╔═╗║╔══╩╣╠╩╗╔╗║"));
-  Serial.println(F("         ║╚═╝║╚══╗║║─║║║║"));
-  Serial.println(F("         ║╔╗╔╣╔══╝║║─║║║║"));
-  Serial.println(F("         ║║║╚╣║──╔╣╠╦╝╚╝║"));
-  Serial.println(F("         ╚╝╚═╩╝──╚══╩═══╝"));  
-  Serial.println(F("By Ruben Schoonbaert"));
-  Serial.println(F("Written 29/12/2023"));
-}
-
-void setup() {
-  Serial.begin(9600);
-  pinMode(24, OUTPUT);
-  pinMode(25, OUTPUT);
-  digitalWrite(25, HIGH);
-  printStart();
-  
-  // Initialize ST25DV sensor
-  if(st25dv.begin() == 0) {
-    Serial.println(F("ST25DV Sensor initialized successfully."));
-    beep(2000, 100, 50);
-  } else {
-    Serial.println(F("ST25DV Sensor initialization failed!"));
-    digitalWrite(25, HIGH);
-    while(1);
-  }
-  
-  delay(500);
-  digitalWrite(25, LOW);
-
-  // Begin I2C communication (only if using MyWire instance)
-  #if !defined(ARDUINO_B_L4S5I_IOT01A)
-    DEV_I2C.begin();
-    // Send message to ESP8266
-    String message = "Test!";
-    DEV_I2C.beginTransmission(8); // Replace with your ESP8266's I2C address
-    DEV_I2C.print(message);
-    byte error = DEV_I2C.endTransmission();
-    
-    if (error == 0) {
-      Serial.println("Message sent successfully to ESP8266.");
-    } else {
-      Serial.print("Error sending message to ESP8266. Error code: ");
-      Serial.println(error);
-    }
-  #endif
-}
-
-void loop() {
-  // Your main loop code here
-  
-}